Bhopal draws on the Upper Lake, Kolar, Kerwa and the Narmada, yet one burst on the Kolar line once left about 60 per cent of the city dry for two days. We keep your tanks ready for that.
From source to your tap
Bhopal Municipal Corporation supplies around 450 MLD from four surface sources, the Upper Lake, the Kolar and Kerwa dams and the Narmada, through about 15 treatment plants and 173 overhead tanks. Old Bhopal around Budhwara still leans on the Upper Lake, while Kolar, Shahpura, Arera Colony and MP Nagar went dry when the Kolar pipeline burst in 2021. In 2026 the corporation took public tubewells off drinking duty after E. coli turned up in a Khanugaon well. Devyami helps homes, societies and Mandideep factories catch supply reliably, treat any borewell water they still use, and keep pumps safe when a main fails.
Step 1
Raw water comes from the Upper Lake (Bhojtal), the Kolar and Kerwa dams, and the Narmada.
Step 2
It is treated at about 15 plants, among them the 50 MLD Manuabhan Tekri plant near Lalghati.
Step 3
BMC pushes it through some 3,885 km of pipeline, 173 overhead tanks and 110 underground reservoirs to roughly 2.7 lakh household connections.
Step 4
From your connection it fills a sump or tank, and your pump and controller decide whether it lasts the day.
Where we take over
Sensors read every tank, an APCON controller runs and protects the pump, and the app shows it all on your phone.
How automation works →Bhopal's water, honestly
In April 2021 a burst on the roughly 30-year-old Kolar pipeline left about 60 per cent of Bhopal without water for two days. When supply returned, pressure was low in areas from Kolar and Shahpura to Arera Colony, MP Nagar and TT Nagar.
How we fix it
A twin motor driver runs two pumps with shared duty and automatic changeover, and its level control refills your overhead tank as soon as weak or late supply reaches the sump.
About six lakh residents of old Bhopal depend on the Upper Lake, drawing around 86 MLD. In the dry summer of 2019 the lake fell below its 1,652-foot minimum level and old-city areas were being supplied on alternate days.
How we fix it
Wireless level sensors and the Devyami IoT app show how much each supply actually delivered and how fast your building is using it, so you can ration before the tank empties.
In 2026 BMC banned drinking water from public tubewells, hand pumps, wells and stepwells after E. coli was found in a Khanugaon well, and moved to decommission 111 of its 247 tubewells. A CGWB study of the Bhopal urban area found nitrate linked to sewage, and iron and manganese of natural origin, in groundwater.
How we fix it
If your home or campus still uses a private borewell, we fit iron-removal and multigrade filtration with UV and RO for drinking water, sized to a lab test.
In September 2026 three days of rain took the Upper Lake to its full level of 1,666.8 feet, Bhadbhada's gates were opened and the administration alerted low-lying areas. Several parts of the city were waterlogged and some road surfaces began breaking up.
How we fix it
A dewatering pump with automatic level start protects basements, lift pits and ground-floor sumps, and the app tells you when it switches on.
Bhopal touched about 45.5°C in late May 2024. On 9 December 2025 its minimum fell to 7.2°C, about 5°C below normal.
How we fix it
A heat pump supplies hot water through the cold weeks using far less electricity than a geyser, and solar heaters cover the long dry season.
Something else?
Describe it in your own words. An engineer who knows Bhopal's conditions will call you back.
Through the year
Reservoirs draw down and the Upper Lake comes under pressure, while afternoons can climb past 45°C.
Dry-run protection and usage alerts →When the Upper Lake fills, Bhadbhada's gates open and low-lying areas are put on alert, as happened in September 2026.
Dewatering pumps and UV treatment →December nights can fall to around 7°C, and hot water for mornings becomes a daily need rather than a luxury.
Heat pumps and solar hot water →One partner for every drop
Automation, pumping, heating, treatment and pools — designed together, so the pieces work as one system.
Your entire water system, in your pocket.
Your pumps, on autopilot — protected, connected, accountable.
Move water exactly where it needs to be.
Hot water without the energy bill guilt.
Every drop, the quality it should be.
Engineering behind the shimmer.
Watch it run
This is the same diagram our customers see in the app. The sump and the overhead tank are both sensed, and one APCON controller decides when the pump runs.
Engineered by us since 1996
Two pumps from one controller — duty shared, each motor protected on its own.
View product →Runs the compressor, fan, circulation pump and backup heater as one plan.
View product →
Starter, controller and motor protection for one pump — single or three phase.
View product →Up to six pumps — drives and direct-on-line — running as one system.
View product →Who we build for
Four steps from first call to lifelong service. Swipe or tap a step. Tap a step to see how it works.
Our engineers evaluate your requirements and give you accurate consultation for free.
📍 Request Site Visit
From your requirements we will provide you with a quotation with multiple options.
Our expert engineers will install, inspect & commission the systems at your site.
Be it repairs or maintenance we stand by you as you need more services after sales.
🛠 Register ComplaintAcross the city
Old neighbourhoods and new growth corridors alike, from single homes to whole townships.
And around Bhopal
Installers and plumbers
Become a Devyami dealer. You get our controllers, engineering support and the leads from this page.
Become a dealerQuestions from Bhopal
Store at least a day's demand and automate both ends. A twin motor driver with level control fills the overhead tanks as soon as supply reaches the sump and switches to the standby pump if one fails, and the Devyami IoT app shows tank levels so the committee can arrange tankers early.
BMC has stopped using public tubewells for drinking after E. coli was found in a Khanugaon well, and groundwater in parts of the city carries nitrate, iron and manganese. If you use a private borewell, test it and treat it; we fit iron removal, multigrade filtration and UV or RO matched to the results.
For most families, hostels and hotels, yes. December nights can dip to around 7°C, and a heat pump makes hot water with far less electricity than an electric geyser. Where you have an open, sunny roof, pair it with a solar heater for the summer months.
Yes. Tell us about your building, society or factory and our engineers design the system around Bhopal's water. A Devyami dealer or installer then installs, commissions and services it locally, and every connected controller can be checked remotely through our platform. The first site consultation is free.
Yes. Level switching, pressure control, schedules and every motor protection run inside the controller on your wall, not in the cloud. The internet only carries the live view and alerts to your phone. The controller keeps its own real-time clock and remembers its delays through a power cut.
Usually, yes. The APCON Motor Driver takes the old starter panel’s place on the wall, on the pump and tanks you already have. Wireless level sensors reach terrace and underground tanks where running a cable would mean breaking walls. A single-pump retrofit is usually done in a few hours.
Free site visit
Describe your home, society, hotel or factory. We'll design around Bhopal's water and connect you with a Devyami dealer who installs and services locally.
Prefer to call? +91 99252-26610
