Smart water solutions in Jaipur

Put the sump-to-overhead-tank pump on a level controller. Devyami's APCON motor driver senses water in the sump, starts the pump, stops it when the overhead tank is full and trips it if the sump runs dry. If you have more than one tank, a multi-tank level controller fills them in order from the same pump set.

Often, but test first. Groundwater in parts of Jaipur carries high TDS and nitrate, and fluoride is a known problem in the district. We size the RO plant and pre-filters to your lab report and add an APCON RO controller so you can see when membranes need attention.

Since a 2010 amendment to Rajasthan's Urban Improvement Act, buildings constructed on urban plots larger than 300 sq m must install rainwater harvesting. Devyami can add level sensing and a transfer pump if you store roof water for reuse, and a dewatering pump with automatic start for basements that take in water during heavy rain.

Yes. Tell us about your building, society or factory and our engineers design the system around Jaipur's water. A Devyami dealer or installer then installs, commissions and services it locally, and every connected controller can be checked remotely through our platform. The first site consultation is free.

Yes. Level switching, pressure control, schedules and every motor protection run inside the controller on your wall, not in the cloud. The internet only carries the live view and alerts to your phone. The controller keeps its own real-time clock and remembers its delays through a power cut.

Usually, yes. The APCON Motor Driver takes the old starter panel’s place on the wall, on the pump and tanks you already have. Wireless level sensors reach terrace and underground tanks where running a cable would mean breaking walls. A single-pump retrofit is usually done in a few hours.